AAPRO NVIDIA Tesla M60 PETG Shroud for Dual 5015 Blower Fans
- Brand: AAPRO
- Model: NVIDIA Tesla M60 Shroud
- Compatibility: NVIDIA Tesla M60
- Material: PETG (3D Printed)
- Cooling Support: 2 x 5015 Blower Fans
- Design: Fits within the graphics card footprint to avoid obstructing adjacent expansion slots
- Maximum Temperature: Up to 70°C
- Colour: Random (Not Customizable)
- Required Hardware: 2 x 5015 Blower Fans
- Required Screws: 3 x M3x10, 4 x M3x20 or 4 x M3x25
- Required Nuts: 4 x M3
- Recommended Use: Larger desktop cases or rack-mounted chassis
YOU WILL GET JUST ONE SHROUD
Designed specifically for the NVIDIA Tesla M60, this PETG 3D printed shroud allows the installation of two 5015 blower fans while remaining within the original graphics card footprint, helping to avoid blocking neighbouring expansion slots.
Manufactured from PETG for improved heat resistance, making it suitable for internal chassis temperatures up to 70°C. As this is a 3D printed item, small cosmetic defects or surface blemishes may be present.
Please note that the colour is supplied at random and cannot be selected due to changing filament availability.
Parts required (not included):
- 2 x 5015 Blower Fans
- 3 x M3x10 Screws
- 4 x M3x20 or M3x25 Screws
- 4 x M3 Nuts
For demanding or continuous heavy workloads, high-quality blower fans are strongly recommended.
Please check that you have sufficient clearance before purchasing (37cm=370mm=14.56 inch).
This cooling solution is intended for larger desktop cases or rack-mounted systems.
Blower fans and NVIDIA Tesla M60 graphics card are NOT included.
NOTHING ELSE IS INCLUDED.
PLEASE MAKE SURE YOU CAREFULLY READ THE DESCRIPTION
AND CHECK ALL THE PHOTOS
NOTE FOR LISTINGS WITH MORE THAN ONE ITEM AVAILABLE:
ITEMS MIGHT LOOK SLIGHTLY DIFFERENT FROM THE ONE ON THE PHOTO,
BUT WILL HAVE EXACTLY THE SAME SPECS AND PERFORMANCE.
ITEMS WILL BE SENT AT RANDOM.
